Elpro > Products > Calibration instruments and equipment > Calibration instruments - pressure > CPB8000 automatic pressure equaliser from WIKA

CPB8000 automatic pressure equaliser from WIKA

Iskanje

The CPB8000 automatic pressure equaliser is used for automatic calibration and control of pressure instruments.

Šifra: CPB8000

Po naročilu. Pošljite povpraševanje.

Dobavni rok: 14 days

  • automatic pressuregeneration
  • shared measurement uncertainty to 20 ppm reading
  • operating temperature range: +18 °C … +28 °C
  • Relative humidity: 15 … 85% RH (non-condensing)
  • automatic mass loading system with a resolution of up to 0.1 g
  • available up to 1,000bar/14,500 psi pneumatically and 5,000 bar/72, 500 psi hydraulically

[Sassy_Social_Share]

Področja:

,

Description

The CPB8000 automatic pressure equaliser from WIKA is used for automatic calibration and control of pressure instruments and allows a wide variety of calibrations.

Reference Primary Standards
Pressure equalisers are very accurate basic pressure standards, which define a derived unit of pressure directly from the fundamental units of mass, length and time according to the formula p = F/A.
Direct pressure measurement with a pressure equaliser combined with the expertise of Desgranges & Huot provides the best metrology specifications on the market.

  • Protection and uninterrupted handling z mass
  • High-quality piston-cylinder system(high float time and long-term stability)

This type of pressure equaliser has beensuccessfully tested by national institutes, calibration laboratories and all types of industry.

Calibration large scale
CPB8000 is bwas designed to, to provide the best available metrological specifications, while responding to industry demands. A system for u CPB8000 pressure regulator, which ensures a high MTBF, can also generate and regulate with a high tested volume.

Automation and metrology
The servo-controlled pressure generating spindle pump, combined with the integrated optical sensing to measure the piston position, allows precise and reliable pressure regulation. The mass, which is protected in a cabinet, is handled with care to ensure maximum stability. Finally, the pressure is automatically fully corrected taking into account all ambient parameters.

Models
The CPB8000 is available in four versions: with pneumatic or hydraulic pressure, with or without a set mass handling system (optionally up to 10 mg). A wide range of piston-cylinder systems is available to best suit your specific requirements.

 

To view additional options and more technical features, we recommend viewing the attached pdfs. documents under the Documentation section.

 

Scope, applications CPB8000

  • large-scale calibrations
  • automatic calibration and checking of pressure instruments
  • powerful solution for testing and calibration of high specification pressure sensors
  • combination of automation with a high level primary pressure equaliser

Povpraševanje

    You may also like…

    The CPB6000DP Primary Standard Differential Pressure Equalizer is used in a wide variety of calibration and pressure measurement tasks.

    CPB6000DPCPB6000DP WIKA Primary Standard Differential Pressure Equalizer

    The CPB6000DP WIKA Primary Standard Differential Pressure Equalizer is used in a…

    Read more
    The CPB6000 Primary Standard Pressure Equalizer can be used in a wide variety of calibration and pressure measurement tasks.

    CPB6000CPB6000 WIKA Primary Standard Pressure Equalizer

    The CPB6000 WIKA Primary Standard Pressure Equalizer can be used in a…

    Read more